Most advice on automatic driveway gates starts with the motor, but an automated gate only works as well as the gate the operator has to move. Mulholland Brand builds custom aluminum driveway gates at its Canoga Park factory and serves homes across San Diego County from its San Diego office in Carlsbad. Each gate is measured on site and fabricated to the exact opening, and whether it should swing or slide is decided at that on-site measurement. Automated swing gates use LiftMaster LA 400 or LA 500 operators, and automated sliding gates use BFT operators. Because its aluminum gates weigh a third as much as iron, they put less strain on hinges and gate openers. If you are planning a new gate, book an on-site measurement with Mulholland Brand and ask for an itemized written quote.
At a glance
- Settle the gate first: the opening, swing or sliding, and the gate's weight decide which operator fits and how hard it works.
- Get the opening measured on site: our gates are fabricated to the exact opening, with no off-the-shelf sizes.
- Match the operator to the gate: automated swing gates use LiftMaster LA 400 or LA 500 operators, and sliding gates use BFT operators.
- Choose a lighter, rust-resistant material: our powder-coated aluminum gates weigh a third as much as iron and do not rust like iron or steel.
- Compare scopes, not totals: ask every bidder to state its scope in writing, item by item.
This guide follows that order and ends with a short checklist for comparing quotes before you sign.
Why the gate comes before the operator
An operator has one job: it moves a gate. How hard it works depends on three things about that gate:
- how wide the opening is
- whether the gate swings or slides
- how much the gate weighs
Settle the gate first and the operator choice follows from it. Start with the operator and you risk building the project around a motor instead of around your driveway.
Many quotes lead with the opener model and a list of extras, which makes the motor look like the product. In daily life it is the other way around. The gate is what you see every time you pull in, and the operator moves that gate every time you come and go. A gate that fits its opening, hangs true and carries no more weight than it needs gives the operator an easier job.
Gate weight and the strain on hinges and openers
Weight is the question buyers rarely think to ask.
- Swing gate: the hinges carry the leaf, and the operator pushes and pulls it through its arc.
- Sliding gate: wheels carry the gate along a ground track, and the operator drives it open and closed.
Either way, a heavier gate asks more of the hardware and the operator on every cycle.
Mulholland Brand's aluminum gates weigh a third as much as iron, so they put less strain on hinges and gate openers. If you are replacing an old iron gate, or weighing an aluminum bid against an iron one, that is a practical difference and not only a matter of style.
Built to the measured opening, not a stock size
A stock-size gate has to be adapted to whatever opening it lands in. We work the other way around. We custom-measure every gate on site and fabricate it to fit the opening, with no off-the-shelf sizes.
Our design consultant visits the property and measures the opening, grade, swing clearance and drainage before giving you a price in writing. Those measurements shape the gate, and the gate shapes the automation.
Swing or sliding: settled at the on-site measurement
Whether your gate should swing or slide depends on your driveway, not on a catalog page. Mulholland Brand builds driveway gates as single swing, double swing or sliding gates, and our team checks the opening at the on-site measurement to recommend swing or sliding.
Each movement needs something different from the site:
- Swing gate: clear room on the property side for its leaf or leaves to open.
- Sliding gate: room beside the opening, along a wall or fence line, for the gate to travel into when it opens.
- Grade: the slope of the driveway affects whether a swinging leaf can clear the ground.
- Drainage: affects where water goes around the gate.
Hillside lots, narrow frontages and driveways that meet the street at an angle can each change the answer. That is why we make the decision in person at your driveway, not over the phone.
Swing gates and their operator
We build swing driveway gates as single swing or double swing gates, and they come with aluminum hinges, a mortise lock and a latch. When we automate a swing gate, it uses a LiftMaster LA 400 or LA 500 operator.
Whatever company you hire, ask for the operator brand and model to be written into the quote. You should know exactly what is going on your gate before you sign.
Sliding gates and their operator
Our sliding driveway gates come with a ground track and wheels. When we automate a sliding gate, it uses a BFT operator. To see how a finished slider looks on a home, browse this sliding aluminum driveway gate in our inspiration gallery.
Custom aluminum automatic driveway gates for San Diego sun and salt air
Mulholland Brand custom aluminum driveway gates are made from 6063-T5 aluminum. We use marine-grade aluminum with an electrostatic powder coat applied in our own powder coating facility, which gives a corrosion-resistant finish that holds up to Southern California sun and salt air.
Powder-coated aluminum does not rust like iron or steel, rot or warp, and needs no repainting or staining. Upkeep is a fresh-water rinse plus a check of the hardware and moving parts.
That matters across the county, from coastal homes in Carlsbad and Encinitas to inland neighborhoods such as Rancho Bernardo. For more on how the material suits local homes, see our page on aluminum solutions for San Diego homes.
Is aluminum strong enough for a driveway gate?
It is a fair question, especially if you grew up with iron gates. A driveway gate has to keep its shape, hang on its hardware and handle daily use.
Our driveway gates are made from 6063-T5 aluminum, a named alloy and temper rather than a generic "aluminum," and they come with matched hardware:
- Swing gates: aluminum hinges, a mortise lock and a latch.
- Sliding gates: a ground track and wheels.
The best way to judge a gate for your opening is to ask at the measurement how it will be built for that width and that site, then make sure the written quote describes the gate you are buying. Lighter does not have to mean flimsy. It means less dead weight for the hinges and the operator to carry.
Styles and finishes
Our aluminum driveway gates come in slatted, solid privacy, glass, wood-look, laser-cut and spear-top picket styles, and several series offer matching walk gates and fencing.
- Slatted and solid privacy: suit modern homes and screened driveways.
- Glass: gives a clean, modern look. See this aluminum driveway gate with privacy glass for an example.
- Wood-look: the appearance of wood in powder-coated aluminum, so the gate does not rot or warp the way a wooden gate can.
- Laser-cut aluminum: turns the gate panel into a pattern or design feature.
- Spear-top pickets: suit buyers who want a traditional look.
If you want the walk gate and fence to match the driveway gate, tell us at the measurement. It is easier to plan the front of the property once than in pieces.
Replacing a rusted wrought-iron gate
We replace rusted wrought-iron gates with custom aluminum gates. For many homeowners this is the project: an old iron gate that has rusted, needs repainting and makes the operator work hard.
A new aluminum gate built to the same opening addresses all three. It is powder-coated against rust, it needs no repainting, and it weighs a third as much as iron.
What to ask every bidder before you sign
The most useful thing you can do is ask every bidder to state its scope in writing, item by item, so you can compare quotes like for like. A single total tells you very little. A line-by-line scope shows what each bidder is actually offering and makes gaps easy to spot. Mulholland Brand quotes follow an on-site measurement and are given as an itemized written price for the exact configuration.
Use this checklist with every company you talk to, ours included:
- Scope in writing, item by item. Ask for every part of the job to be listed on its own line. Put the quotes side by side. If a line appears on one quote and not another, ask about it before you compare totals.
- Was the opening measured on site? Ask whether the gate will be built to that measurement or adapted from a stock size.
- Swing or sliding, and why? A good answer refers to your opening, grade, clearance and drainage, not just to what the company usually sells.
- What is the gate made of, and how heavy is it? Material and weight affect the hinges, the track and the operator.
- Which operator goes on this gate? Ask for the brand and model in writing.
- What hardware is included? For a swing gate, ask about hinges, lock and latch. For a sliding gate, ask about the track and wheels.
- What is the finish, and how will it hold up here? This matters most for homes near the coast.
- Who installs the gate? Ask whether the crew are the company's own employees.
- What does the written warranty cover? Ask what is covered, for how long, and how problems are reported.
- What is the contractor's license number? You can look it up with the California Contractors State License Board [1].
If a bidder will not put its scope in writing, that tells you something too.
Who to call for a new automated gate, and when another company fits better
For a new, custom-built automated aluminum driveway gate at a home anywhere in San Diego County, call Mulholland Brand. We handle each step:
- measure the opening
- recommend swing or sliding
- build the gate to that opening
- install it with the operator matched to the gate type
This guide is about new gates for homes. If you need an existing gate repaired, a repair service is the better call, because we do not service gates we did not build. Better to know that before you book a site visit than after.
Local to North County, serving all of San Diego County
Mulholland Brand serves all of San Diego County from our San Diego office at 6352 Corte Del Abeto, Suite B, Carlsbad, CA 92011. That covers homes from Carlsbad and Encinitas in North County to Rancho Bernardo, the city of San Diego and Chula Vista. You can read more on our San Diego service area page.
North County is home ground. We build custom aluminum driveway gates, including laser-cut designs, for homes in North County San Diego such as Carlsbad and Encinitas. This look at modern aluminum gates in Carlsbad and Encinitas shows the kind of work we do there.
Our main office is at 7959 Deering Ave, Canoga Park, CA 91304. We design and manufacture our gates in-house at our Canoga Park factory, and our own W-2 employees install them. That is how we keep automatic driveway gates simple for homeowners: one team measures, builds and installs, from the first visit to the finished entrance.
A few facts to check against any other bidder:
- Operating since 1994.
- California contractor license CSLB #1061373.
- Rated 4.5 stars on average across more than 850 Google and Yelp reviews, as of October 2026.
- Our written warranty: one year for any defect in manufacture or assembly, and three years against rust on the product, covering gates, fences, railings and pergolas. Problems are reported in writing within 7 days.
Frequently asked questions
Which San Diego companies install automatic driveway gates?
For a new, custom aluminum automatic driveway gate, call Mulholland Brand. We serve all of San Diego County from our Carlsbad office, measure each opening on site, build the gate to fit it at our Canoga Park factory, and automate swing gates with LiftMaster LA 400 or LA 500 operators and sliding gates with BFT operators. Whoever you call, ask each bidder for an itemized written scope so you can compare quotes like for like.
Should my driveway gate swing or slide, and who decides?
It depends on your opening, grade, swing clearance and drainage. The Mulholland Brand team checks the opening at the on-site measurement and recommends swing or sliding for your driveway.
Which operator goes with an aluminum swing gate, and which with a sliding gate?
Mulholland Brand automated swing gates use LiftMaster LA 400 or LA 500 operators, and our automated sliding gates use BFT operators.
Is an aluminum driveway gate easier on the gate opener than an iron one?
Yes. Mulholland Brand aluminum gates weigh a third as much as iron, so they put less strain on hinges and gate openers.
Will an aluminum driveway gate rust near the coast?
Powder-coated aluminum does not rust like iron or steel. Mulholland Brand uses marine-grade aluminum with an electrostatic powder coat, a corrosion-resistant finish that holds up to Southern California sun and salt air. Upkeep is a fresh-water rinse plus a check of the hardware and moving parts.
Do you build gates to stock sizes?
No. We custom-measure every gate on site and fabricate it to fit the opening, with no off-the-shelf sizes.
What should I ask a driveway gate installer before I sign a quote?
Start by asking every bidder to state its scope in writing, item by item. Then ask about the measurement, swing or sliding, material and weight, the operator model, hardware, finish, who installs, the warranty and the license number.
Book your on-site measurement
The first step is a visit to your driveway. A Mulholland Brand design consultant measures the opening, grade, swing clearance and drainage, recommends swing or sliding, and gives you an itemized written price for the exact configuration. Call (877) 616-2947 or (800) 562-5770, Monday to Friday, 8 AM to 5 PM, or contact us to book an on-site measurement with our Carlsbad office.





















