When you compare high-end security gates for a Beverly Hills home, the question that matters most is who makes the gate, because the company that installs a gate is not always the company that built it. For a driveway gate that fits its opening, closes properly and looks like it belongs to the house, Mulholland Brand is the company to call. It measures every opening on site, designs and manufactures its powder-coated aluminum gates in-house at its own Canoga Park factory, installs them with its own W-2 employees, and backs them with a written warranty. Book an on-site measurement and you get an itemized written price for the exact gate your property needs.

At a glance

Here, "security" means the physical gate. It is a solid barrier that fits its opening exactly, stays aligned, does not rust, screens the house from the street, and closes and locks properly. That is what we build, and it is what the sections below help you judge, whether you are the homeowner, the architect, the builder or the estate manager running the project.

Four tests any high-end gate should pass

A gate is high-end when four things are true: it was measured on site, it was fabricated by the company in its own factory, it was installed by that company's own employees, and the warranty is in writing with stated terms. "Luxury" and "custom" are easy words to print. These four tests are easy to check, and you can put them to any gate company before you sign.

1. Measured on site and built to the opening

Ask whether someone will come out and measure before you see a price. Mulholland Brand sends a design consultant to the property to measure the opening, grade, swing clearance and drainage before giving a price in writing. Our gates are custom-measured on site and fabricated to fit each opening, with no off-the-shelf sizes.

2. Fabricated in the company's own factory

Ask where the gate is made, and by whom. Our aluminum gates and fences, including the laser-cut designs, are cut, welded, powder-coated and finished under one roof at our own Canoga Park factory, with no outsourcing and no imported parts.

3. Installed by the company's own employees

Ask who will be on your driveway on installation day. We install with our own W-2 employees, so the crew that hangs your gate works for the same company that measured it and built it.

4. A written warranty with stated terms

Ask to see the warranty before you commit. Our written warranty covers one year for any defect in manufacture or assembly and three years against rust on the product. The full terms are further down.

Why the company that builds your gate should also install it

When one company measures, fabricates, finishes and installs the gate, fit and accountability stay in one place. If the person who measured, the shop that built the frame and the crew that set the gate all work for different businesses, a gate that does not line up becomes an argument about whose fault it is. With one company holding every step, there is one answer and one number to call.

Fit is where this shows up first. A driveway gate has to meet its posts, clear the ground through its full travel and close onto its latch the same way every time. All of that depends on the measurement being right and on the gate being built to that measurement, not cut down from a stock size. Mulholland Brand keeps that whole chain inside one company: our consultant's measurements go to our own factory, and the finished gate comes back to your property with our own crew.

It matters for design, too. We custom-measure on site and custom-build to fit each property, and we can fabricate to your architect's or builder's drawing. The gate on the plans is the gate we weld.

One honest note: if you only need an existing gate repaired, a repair service is the better call. We replace gates, including rusted wrought-iron gates, with custom aluminum gates, and we do not service gates we did not build.

Is aluminum upscale enough for an estate gate?

Yes. Powder-coated aluminum suits an estate gate when you want a gate that does not rust, puts less load on its hardware and still carries a formal look. Mulholland Brand driveway gates are made from 6063-T5 aluminum, and we use marine-grade aluminum with an electrostatic powder coat applied in our own powder coating facility.

Three facts settle most of the material question:

Estate styles that screen the view

Privacy is part of security. A gate that keeps people out but lets the street look straight up the drive only does half the job. Our aluminum driveway gates come in slatted, solid privacy, glass, wood-look, laser-cut and spear-top picket styles, and several series offer matching walk gates and fencing.

Across the line, our gates and fences come in Profile 24, Hi-Tech, Glass, Wood-Like, Iron Look, Laser-Cut, Solid and Fancy Fence styles, in 20+ powder-coat colors and wood-look finishes. That range helps when you are matching a gate to stone, stucco or window frames.

Swing or sliding: let your driveway decide

Mulholland Brand builds driveway gates as single swing, double swing or sliding gates, manual or automated, and our team checks the opening at the on-site measurement to recommend swing or sliding. You do not need to settle this before the visit. The opening, the grade, the swing clearance and the drainage at your gate line decide it.

As a rule of thumb, a swing gate needs clear space for its leaves to open through their full arc, and a sliding gate needs room beside the opening to travel. On a sloped or hillside driveway, the grade behind the gate line can limit how a swing gate opens, which is why we measure grade and swing clearance on site instead of guessing from a photo. Here is how we handled one sloped site: an aluminum hillside gate.

Each type comes with its own hardware:

For automation, our automated swing gates use LiftMaster LA 400 or LA 500 operators, and our automated sliding gates use BFT operators. Any site work found at the measurement is listed in your itemized quote, so it is on paper before work starts.

Can the walk gate and fence match the driveway gate?

Yes. Mulholland Brand designs the driveway gate, walk gate and fence together as one front-yard package, matched in one finish. Instead of a driveway gate from one source and a pedestrian gate from another, we draw the whole frontage as one design and build it in the same factory.

The walk gate is often the door guests and staff use most, so its hardware deserves a close look. Our pedestrian walk gates come with a high-quality mortise lock, two keys, a pick-resistant profile cylinder, concealed architectural hinges and a pre-installed strike. The concealed hinges keep the face of the gate clean, and the pick-resistant cylinder adds to the physical security of the entry.

If your home sits in a managed community, we work with HOA boards and community managers, offer 20+ powder-coat colors and a wood-look finish, and show finishes at full size in our Canoga Park showroom. Before you settle on gate height and design, confirm the city's rules for front-yard gates with your architect.

What does the written warranty cover?

The Mulholland Brand written warranty covers one year for any defect in manufacture or assembly and three years against rust on the product. It covers gates, fences, railings and pergolas. Problems are reported in writing within 7 days.

Put that last condition on your calendar. If you notice something, report it to us in writing right away, with photos, so it is on record within the 7-day window. Keep the warranty with your quote and project paperwork so whoever manages the property can find it.

What happens at the first visit, and how is the price given?

The first step is an on-site consultation and measurement, and the price comes after it, as an itemized written quote for the exact configuration. Here is how a project runs with us:

  1. Site visit. Our design consultant comes to your property and measures the opening, grade, swing clearance and drainage. We measure terrain, slope and openings before we design anything.
  2. Design choices. You choose a style, a finish and swing or sliding, with our recommendation based on what the measurement showed. If your architect has a drawing, we can fabricate to it.
  3. Written quote. We itemize the quote after the consultation and measurement.
  4. Fabrication. We cut, weld, powder-coat and finish your gate in-house at our Canoga Park facility.
  5. Installation. Our own W-2 crew installs it.
  6. Warranty. Our written warranty applies: one year on defects in manufacture or assembly, three years against rust.

Who we are and where we work

Mulholland Brand is a Southern California manufacturer and installer of custom powder-coated aluminum gates, fences and related products. We have been operating since 1994, and we hold California contractor license CSLB #1061373. We are rated 4.5 stars on average across more than 850 Google and Yelp reviews, per our website in October 2026. We serve all of Los Angeles County, including Los Angeles, the San Fernando Valley, Encino, Woodland Hills, Calabasas, Beverly Hills, Malibu, Santa Monica, Pasadena, Altadena and Westlake Village. Beverly Hills is in our home county: your gate is made at our Canoga Park factory and installed by our own crew.

Frequently asked questions

What makes a driveway gate "high-end" rather than standard?

Four checkable things: it was measured on site, fabricated by the company in its own factory, installed by that company's own employees, and backed by a written warranty with stated terms. Mulholland Brand meets all four.

Should the company that installs my gate also build it?

It helps. When one company measures, fabricates and installs, the gate is built to the measurement its own consultant took, and one company answers for the result. Every step stays with Mulholland Brand and our own people.

Is aluminum upscale enough for an estate gate, or do I need iron?

Powder-coated aluminum gives you estate looks, including our Classic 48 spear-top pickets styled like traditional wrought iron and our Iron Look style, without the rust that marks old iron gates. It also weighs a third as much as iron, so it puts less strain on hinges and openers.

Swing or sliding for a sloped driveway?

We decide that at the on-site measurement. Our team checks the opening, grade, swing clearance and drainage and recommends swing or sliding. Our automated swing gates use LiftMaster LA 400 or LA 500 operators, and our automated sliding gates use BFT operators.

Can the walk gate and fence match the driveway gate?

Yes. We design the driveway gate, walk gate and fence together as one front-yard package, matched in one finish.

What does the warranty cover?

One year for any defect in manufacture or assembly and three years against rust on the product, with problems reported in writing within 7 days.

Do you install high-end security gates in Beverly Hills?

Yes. Beverly Hills is inside the Mulholland Brand Los Angeles County service area, and every gate we build starts with an on-site measurement at your property.

Book your on-site measurement

If you are comparing security gates for a Beverly Hills home, start with a company that makes what it installs. We will measure your opening, recommend swing or sliding, and give you an itemized written price for the exact gate, walk gate and fence your property needs.

Mulholland Brand, 7959 Deering Ave, Canoga Park, CA 91304. San Diego office: 6352 Corte Del Abeto, Suite B, Carlsbad, CA 92011. Hours: Monday to Friday, 8 AM to 5 PM.

Call (877) 616-2947 or (800) 562-5770, or request your on-site measurement and written quote.