Hi-Tech for Garage Doors

Modern lines, real privacy

The Hi-Tech Framed series is built for a modern exterior. Narrow horizontal profiles sit inside a clean traditional frame, giving you greater security and privacy without completely obscuring your home. You keep visibility from the inside looking out, while the view in is screened.

The Hi-Tech Frameless series drops the visible frame. Narrow horizontal profiles are braced from behind so the panel appears to float, for the most minimal, architectural read of the three. It holds the same inside-out visibility while raising privacy from the outside.

The Hi-Tech 45° series angles its horizontal elements downward at 45 degrees. That angle lets air move through while bringing greater privacy, so you keep visibility from the inside out and the view in stays screened. The most private profile in the Hi-Tech family.

Hi-Tech Framed
Hi-Tech Frameless
Hi-Tech 45° Angle
Your buildHi-Tech · Framed · Horizontal
Series / Style
Bar orientation

45° is offered in horizontal bars only.

Get a Quote

Pair your Hi-Tech

Complete the look. More ways to carry it across your property.

Profile 24 for Garage Doors

Our most versatile series

'Profile 24' refers to the 24mm depth of each slat. Simple horizontal or vertical profiles in varying widths and gap sizes make it our most versatile series, suitable for almost any home or business, and engineered to accommodate hilly terrain.

Mixed 24 runs vertical and horizontal slats together in the same panel, so one gate carries both directions. It breaks up a long run and gives the entry a focal point without changing the material or the finish anywhere else on the property.

Mixed with Glass sets laminated glass panels among the 24mm slats. The glass brings light and reflection into the entry while the slats hold the structure and keep the screening where you want it.

Profile 24 Standard
Profile 24 Mixed 24
Profile 24 Mixed with Glass
Your buildProfile 24 · Standard · Horizontal
Series / Style
Bar orientation

This series already runs both directions in the same panel, so there is no single bar orientation to set.

This series already runs both directions in the same panel, so there is no single bar orientation to set.

Get a Quote

Pair your Profile 24

Complete the look. More ways to carry it across your property.

Glass Series for Garage Doors

Reflective glass, uncompromised security

Black laminated glass set in a fully welded aluminium frame. From outside it reads as a solid, reflective plane and gives you complete privacy; from inside you keep the daylight and the view. Every panel is laminated for safety and security, and the frame is powder-coated inside and out.

White laminated glass in the same welded aluminium frame. It diffuses light rather than reflecting it, so the gate reads bright and soft against a light-coloured house instead of as a dark plane. Maximum glass panel size is 3'×4', and larger openings are made up as a grid of panels within the frame.

Glass Series Black Glass
Glass Series White Glass
Your buildGlass Series · Black Glass
Glass
Get a Quote

Solid Series for Garage Doors

Maximum privacy, elegant and strong

The core Solid build: a closed aluminium panel with no gaps at all, in four profile widths — 120, 160, 180 and 220mm. The wider the profile, the fewer lines across the panel and the heavier it reads from the street. It is the only Solid sub-series offered running vertically as well as horizontally, so the same panel can be turned to suit the elevation.

The Solid panel broken into a traditional design: two rows, three rows or four-plus rows of panelling, or a shaped face in X, hexagon or square. It carries the privacy of a solid gate with the detail of a panelled front door, which is what suits an older or more formal frontage.

The frameless take on Solid: the panel is built from one to six sheets with no surrounding frame, so the face reads as a single plane. Fewer sheets means a cleaner, larger surface; more sheets break the height into bands. The sheet material can limit the choice on a taller gate, so the height is decided with you.

A solid horizontal panel with glass sections set into it, so the gate keeps its privacy at eye level while letting light through elsewhere. It is the one Solid sub-series that is not offered as an overhead door.

Solid Series Solid 24
Solid Series Solid Classic
Your buildSolid Series · Solid 24 · Horizontal
Design
Bar orientation

Solid Classic is made horizontally. For a vertical run, choose Solid 24.

Solid Frameless is made horizontally. For a vertical run, choose Solid 24.

Solid Mixed Glass is made horizontally only.

Get a Quote

Wood-Like for Garage Doors

The warmth of wood, none of the upkeep

A mid-tone oak grain, warmer and lighter than walnut. It is the pattern that sits most easily against the widest range of houses, which is why it is the one most often specified.

A dark walnut grain on aluminium. It reads as the richest and most traditional of the three patterns and holds its own against stone, brick and dark stucco. None of wood's rot, splitting, cracking or degradation.

A light golden cedar grain, the closest of the three to freshly cut timber. It keeps that colour permanently, which real cedar does not — cedar greys within a season or two outdoors.

Wood-Like Oak
Wood-Like Walnut
Wood-Like Cedar
Your buildWood-Like · Oak
Pattern
Get a Quote

Laser-Cut for Garage Doors

Turn your entrance into a canvas

An aluminium panel cut to a pattern, in the same welded frame as the rest of the catalogue. There are 39 designs in the book, from classical scrollwork to abstract geometry and botanical screens, and we can cut your own artwork as a one-off. Some designs are adjusted to suit the size of the gate and to keep the panel strong.

  • 39 cut designs in the pattern book
  • Your own artwork can be cut as a one-off
  • Combines with glass panels behind the cut
  • Some patterns adjusted for gate size and strength
Laser-Cut Laser-Cut
Your buildLaser-Cut
PatternLZ01
Get a Quote

Choose your pattern LZ01

Designs are listed by their catalog code. Tell us the code, or send us your own artwork and we will cut it as a one-off.

Pair your Laser-Cut

Complete the look. More ways to carry it across your property.

Tongue & Groove for Garage Doors

Sleek, mixed-profile designs

A single profile width running the whole panel, with the tongue-and-groove joint closing each seam. The most restrained of the Tongue & Groove profiles: it reads as one continuous surface from any distance.

A solid tongue-and-groove panel with a band of Hi-Tech louvres set into it, so one gate gives you full privacy across most of its height and airflow and light where the louvres run.

Tongue & Groove Smooth
Your buildTongue & Groove · Smooth
Series / Style
Get a Quote

About our garage doors

Built and installed by the people who make it

Custom aluminum garage doors designed, fabricated and installed by our own crew, engineered to your opening and finished to match the rest of the elevation.

Why Mulholland for garage doors

Over 30 years of experience

Our team of experts has decades of experience in the garage door industry, ensuring we provide the highest level of workmanship and service.

High-quality materials

At our California-based factory, we use high-grade materials to ensure the longevity and durability of our products.

Personalized solutions

We take the time to understand your unique needs and preferences, and tailor our solutions to meet your specific requirements.

Exceptional customer care

From the initial consultation to the final installation, our customer-centric approach ensures you receive a seamless and stress-free experience.

Custom garage solutions

We offer a wide range of garage door styles, materials, and customization options to suit your unique needs and aesthetic preferences.

Why Mulholland

Why choose Mulholland Brand

Since 1994

Craftsmanship & experience

Over 30 years of expertise fabricating and installing gates across Southern California, including challenging terrains, with precision and lasting quality in every project.

Powder-coated aluminum

Durability & low maintenance

The beauty of wood and iron with corrosion resistance and minimal upkeep, engineered for long-lasting elegance in the Southern California climate.

CAL FIRE tested

Safety & sustainability

Rigorously tested for security, with environmentally conscious practices: recycling and sustainable manufacturing throughout.

Local and family-run

Community & respect

Transparency and no unexpected change orders, respect for your property and time, and support for our team and local community initiatives.

Not sure which style?

Tell us about the space and we will point you to the right one.

Request a quote
Custom aluminum gate installed on a Southern California property

Start your project

Ready to design yours?

We come to you, measure your opening, and give you a clear price in writing.

Get a quote

Tell us where to reach you

On-site visit • A price in writing • No obligation