Make the entrance and overall perimeter
Driveway gates, pedestrian gates and architectural entry solutions.
Where to start
What would you like to change about your property?
Expert on Slopes and Hilly Terrains
A grade other fabricators have turned down. Every panel is measured on site and cut to the fall of the land, so a gate and a fence follow the hillside instead of fighting it.
Create more privacy
Fencing, screens and wall-top solutions designed around your property.
Make the backyard somewhere you host
Pergolas, privacy structures and outdoor architectural elements.
For the whole household
Protect your loved ones
Give your pets the freedom to enjoy the outdoors in a space designed to keep them safe. A secure, thoughtfully designed fence gives them room to play, explore, and relax while giving you greater peace of mind.
From open play areas to pet-friendly pools and backyards, create an outdoor environment that works beautifully for both your pets and your home.
Aluminum is Your Solution
Every other exterior material is a maintenance schedule. This one is a decision you make once.
Why us
- 30 years, 1,200+ projectsBuilding for California homes since 1994.
- Custom-measured for your propertyDesigned around your slope, span and grade, so it fits one property: yours.
- Our own crew, start to finishNobody to chase. We designed it, we built it, we installed it.
- Yours aloneA piece of architecture no one else has.
Why now
California's fire codes are tightening, and insurers are following. Wood and vinyl within five feet of the house are becoming a liability — some carriers are already declining renewals over it. That is where our aluminum earns its place: non-combustible, and CAL FIRE tested. Replacing the perimeter now solves the appearance problem and the compliance problem in one project.
No rust. No repainting. Just peace of mind, for years to come.
Wood splits and greys. Iron bleeds rust down your driveway. Every few years there's a contractor to chase and a finish to redo.
It should be the part of the house you never think about — the thing that quietly makes the whole property look like it was meant to be there.
That's what we build. Architectural aluminum, powder-coated to hold its colour through California sun, salt air and fire season. Custom-measured to your property and installed by our own crew.
The cheaper option is the one that gets bought twice.
Wood Decays
- Re-stain or re-sealStripping and recoating the surface to keep moisture out.
- RepaintPrep, prime and repaint once the finish chalks or peels.
- Replace rotted or warped membersCutting out and rebuilding boards that have moved or failed.
- Replace the unitThe whole assembly, bought a second time.
Iron Rusts
- RepaintPrep, prime and repaint once the finish chalks or peels.
- Sand and treat rustGrinding back corrosion and sealing the bare metal.
- Re-weld corroded jointsRe-making the welds where corrosion has eaten the connection.
- Replace the unitThe whole assembly, bought a second time.
Aluminum Withstands
What we build- It can't rustNo iron in it. No orange streaks, ever.
- Colour is baked inPowder coated. Won't chalk, peel or fade.
- Durability for decadesRinse it with a hose twice a year. That's the entire maintenance.
- Light on the hardwareA third the weight of iron. Hinges and openers last years longer.
- It won't burnNon-combustible and CAL FIRE tested.
- It adds value, and keeps itWood and iron depreciate as they decay. Aluminum still looks new when an appraiser sees it.
Where it goes
One property, three decisions
Most homes come to us for one of these and end up doing two — because the point of a single factory and a single finish is that the parts stop looking like separate purchases.
At the street
The part everyone sees first
The entrance is the whole first impression of the property — and the one element a neighbour, a guest and an appraiser all take in before anything else. Gate, garage door and walk gate matched in one finish, so the front of the house reads as one decision rather than three.
Around the property
A boundary that stops asking for anything
Fencing, wall toppers and railings in the same powder-coated aluminum: no rust bleeding down a driveway, no repainting every few seasons, no contractor to chase. It holds its colour through California sun, salt air and fire season.
Where you actually live
The room you didn't know you had
A pergola turns a patio into somewhere you use in July and in January. Cladding and equipment enclosures finish the job — the plant, the pool gear and the bare wall stop being the thing your eye lands on.
The difficult lot
Expert on Slopes and Hilly Terrains
A grade is where most fence and gate work stops — or where it gets forced onto a level line and left with gaps underneath. Every panel we make is engineered for the ground it lands on, and the ground is measured before anything is drawn.
Installed on the slope as it stands
No regrading and no retaining wall to flatten the ground first. Where a run crosses an incline we add channel drainage along the top line, so water never ends up somewhere it was not meant to go.
Measured down to the millimetre
Your terrain, slope and openings are measured on site before anything is drawn or cut. That is the step that decides whether a panel fits the ground or fights it.
A gate for a driveway that will not level
The counterweighted vertical-lift leaf drops into a sealed vault beneath the driveway. Because it moves vertically instead of swinging or sliding, it goes on an inclined drive without levelling the ground around it.
A solid run that follows the hillside
A continuous fence line is stepped and adjusted to the fall of the land rather than held level, so it follows the hillside without leaving gaps underneath it.
From first call to installation, same team
Drawn, built and installed by the same company
Most of this industry subcontracts at least one of those three. We do not — which is why there is nobody to chase when something needs to be right.
- Our own factory in Canoga ParkCut, welded, powder-coated and finished on our floor. Not ordered in and badged.
- Custom-measured to your propertyDesigned around your slope, span and grade, so it fits one property: yours.
- 30 years, 1,200+ projectsBuilding for Southern California homes since 1994.
When you're ready
Start with the part that bothers you most
Tell us about the property and what you want to change. We come out, measure it, and show you what it can look like — or come down to the Canoga Park showroom first and see the finishes at full size.