Mulholland Brand designs, builds and installs automatic driveway gates for homes across Ventura County, including Thousand Oaks, Simi Valley, Camarillo and Oxnard. Each gate is custom powder-coated aluminum, designed and manufactured in-house at its Canoga Park factory and built to an opening a Mulholland design consultant measured on site. Swing gates are automated with a LiftMaster LA 400 or LA 500 operator, sliding gates with a BFT operator, and every gate is installed by Mulholland's own W-2 employees. If you are shortlisting companies for a new automated gate, book an on-site measurement with Mulholland Brand and get an itemized written price for the exact gate your driveway needs.

At a glance

Reliable automatic driveway gates start with one idea: the gate and the motor work together, and the gate comes first. When the gate is built for the measured opening, the operator can be matched to that gate. When a motor is bolted onto whatever gate fits a catalog size, it spends its working life fighting a gate that was never designed for that driveway. This guide follows the decisions in the order we make them: the opening, swing or sliding, weight and operator, finish, matching pieces, then the written price and warranty. We serve Ventura County along with Los Angeles, Orange and San Diego counties. See our Ventura County service area page.

Why Automatic Driveway Gates Start With the Measured Opening

Mulholland Brand builds every driveway gate to fit one opening: yours. We custom-measure each gate on site and fabricate it to fit that opening, with no off-the-shelf sizes, so the gate, its hardware and its operator are all planned around your driveway.

Two driveways of the same width can need very different gates. One rises steeply from the street. Another carries rainwater across the gate line. A third has a planter or wall right where a swing leaf needs to travel. A gate chosen by width alone ignores all of that, and the motor attached to it inherits every problem.

What our design consultant measures

Our design consultant visits the property and measures four things before giving you a price in writing:

Any site work is identified at the same visit, so you see it before you commit. We also check the opening to recommend swing or sliding, which is the next decision.

Should Your Ventura County Driveway Gate Swing or Slide?

Mulholland Brand builds driveway gates as single swing, double swing or sliding gates, manual or automated, and we check the opening at the on-site measurement to recommend swing or sliding. Once the driveway is measured, the right choice is usually clear.

When a swing gate fits

A swing gate opens into the property like a door. It needs clear room for the leaf to travel, or for both leaves on a double swing gate. It works best where the driveway behind the gate is fairly level and there is enough depth before the first parked car, wall or turn. A driveway that climbs from the street is the classic problem, because the rising ground sits in the path of the swinging leaf. Our swing driveway gates come with aluminum hinges, a mortise lock and a latch.

When a sliding gate fits

A sliding gate travels sideways along the fence line. It needs side room next to the opening rather than depth behind it. That often makes it the answer for sloped driveways and for short ones where a swing leaf would hit something. Our sliding driveway gates come with a ground track and wheels. You can see a finished sliding aluminum driveway gate and a gate built for a slope in this aluminum hillside gate.

Reading Ventura County driveways

The county has both kinds of lot. Sloped and hillside driveways are common around Thousand Oaks and Simi Valley, and there the grade often points toward a sliding gate. Flat lots are more typical near the coast in Oxnard and Ventura, where a swing gate often fits and salt air becomes the bigger question. These are general patterns, not rules. The measurement decides. For a closer look at the trade-offs, read our guide on choosing a sliding gate or a swing gate.

Gate Weight and the Operator: Why 6063-T5 Aluminum Matters

Mulholland Brand driveway gates are made from 6063-T5 aluminum, and they weigh a third as much as iron, so they put less strain on hinges and gate openers. A lighter gate gives the operator less mass to start, move and stop every time the gate opens and closes.

Weight is easy to overlook when you choose a gate by its look. Every cycle loads the hinges, and on an automated gate it loads the operator too. A heavy iron gate asks more of both, every day, for as long as it hangs there. Choosing the gate material also decides how hard the operator will work.

Which operator your gate will use

We name our operators. Automated swing gates use LiftMaster LA 400 or LA 500 operators, and automated sliding gates use BFT operators. Because we design the gate first for the measured opening, the operator is matched to that gate rather than chosen before anyone knows what it will carry.

A Finish Built for Coastal Salt Air and Inland Sun

Mulholland Brand gates are marine-grade aluminum with an electrostatic powder coat we apply in our own powder coating facility, a corrosion-resistant finish that holds up to Southern California sun and salt air. That covers both ends of Ventura County: coastal lots near Oxnard and Ventura, and inland neighborhoods around Simi Valley and Thousand Oaks.

Powder-coated aluminum does not rust like iron or steel, rot or warp, and it needs no repainting or staining. Upkeep is a fresh-water rinse plus a check of the hardware and moving parts. If you are living with a tired wrought-iron gate, this is the usual reason to switch. We replace rusted wrought-iron gates with custom aluminum gates, and our Iron Look style keeps the look of iron with none of the rust.

You have plenty of choice in the look. Our aluminum driveway gates come in slatted, solid privacy, glass, wood-look, laser-cut and spear-top picket styles. Gates and fences are offered in Profile 24, Hi-Tech, Glass, Wood-Like, Iron Look, Laser-Cut, Solid and Fancy Fence styles, in 20+ powder-coat colors and wood-look finishes. The wood-look styles are powder-coated aluminum, so you get the look of real wood without the rot. Browse the styles on our custom aluminum driveway gates page.

Who Builds the Gate, and Who Installs It?

Mulholland Brand designs and manufactures its driveway gates in-house. We cut, weld, powder-coat and finish every gate at our Canoga Park facility, and our own W-2 employees install it. That is the direct answer to one of the most useful questions you can ask any company that installs automatic driveway gates: "Do you fabricate the gate yourselves or subcontract it?"

The answer matters because an outsourced gate can pass through several hands. One shop builds it, another finishes it, a separate crew hangs it, and when something is off, it can be hard to know who to call. When we design, build, finish and install the gate, you deal with one team from the measurement to the installation.

We've been operating since 1994, and we're rated 4.5 stars on average across more than 850 Google and Yelp reviews as of October 2026.

This guide is for buyers of a new gate. If you only need an existing gate repaired, a repair service is the better call, because we do not service gates we did not build.

Matching the Driveway Gate, Walk Gate and Fence

Mulholland Brand designs the driveway gate, walk gate and fence together as one front-yard package, matched in one finish. Several of our series offer matching walk gates and fencing, so the side gate and fence line carry the same style and color as the driveway gate.

Designing the pieces together avoids a familiar front-yard mismatch: a new driveway gate beside an older walk gate and a fence in a different color. The on-site visit measures the property's openings, and the itemized written price covers the exact configuration. See the options for matching pedestrian walk gates.

How the Measurement, Written Quote and Warranty Work

Mulholland Brand gives every driveway gate price as an itemized written price for the exact configuration, after an on-site measurement. A gate built to your opening has no catalog price, so the visit comes first.

Here is the path from first call to finished gate:

  1. Book the on-site measurement. Our design consultant measures the opening, grade, swing clearance and drainage.
  2. Get a recommendation. We recommend swing or sliding for your opening, and you choose the style and color.
  3. Review the itemized written price. It covers the exact configuration, with any site work identified at the measurement.
  4. We build the gate in-house. It is cut, welded, powder-coated and finished at our Canoga Park facility, fabricated to fit your opening.
  5. Our own W-2 crew installs it, with a LiftMaster LA 400 or LA 500 operator on a swing gate or a BFT operator on a sliding gate.

If your home is near Thousand Oaks, our guide explains how driveway gate quotes work there. For community entrances, we work with HOA boards and community managers on gate and fence projects, and we can point boards to communities we have already finished.

Our written warranty

Our written warranty is one year for any defect in manufacture or assembly, and three years against rust on the product, covering gates, fences, railings and pergolas. Problems are reported in writing within 7 days. Read the full written warranty terms before you sign, so you know exactly what is covered.

Frequently Asked Questions About Automatic Driveway Gates

These are the questions Ventura County homeowners ask us most when they plan a new automated gate.

Should my Ventura County driveway gate swing or slide?

Mulholland Brand decides this at the on-site measurement. As a general rule, a swing gate needs clear, fairly level room behind the opening for the leaves to travel, while a sliding gate needs side room along the fence line, which often makes it the better fit for a driveway that rises from the street. Our consultant checks your opening, grade and swing clearance and recommends one.

What motor will my automated gate use?

Mulholland Brand automates swing gates with LiftMaster LA 400 or LA 500 operators and sliding gates with BFT operators. We build the gate for the measured opening first, then match the operator to that gate.

Does a heavy gate wear out the opener faster?

A heavier gate puts more load on the hinges and the operator each time it moves. Mulholland Brand driveway gates are built from 6063-T5 aluminum, and they weigh a third as much as iron, so they put less strain on hinges and gate openers.

Will an aluminum driveway gate hold up to salt air near the coast?

Mulholland Brand gates are marine-grade aluminum with an electrostatic powder coat we apply in our own powder coating facility, a corrosion-resistant finish that holds up to Southern California sun and salt air. Powder-coated aluminum does not rust like iron or steel, and upkeep is a fresh-water rinse plus a check of the hardware and moving parts.

Does Mulholland Brand build the gate itself or subcontract it?

Mulholland Brand designs and manufactures its gates in-house. We cut, weld, powder-coat and finish them at our Canoga Park facility, and our own W-2 employees install them.

What does the warranty cover?

Mulholland Brand's written warranty is one year for any defect in manufacture or assembly, and three years against rust on the product, covering gates, fences, railings and pergolas. Problems are reported in writing within 7 days.

How does the quote work? Is there an on-site visit and a written price?

Yes. Mulholland Brand sends a design consultant to measure the opening, grade, swing clearance and drainage, and then we give you an itemized written price for the exact configuration, with any site work identified at that measurement.

Can the walk gate and fence match the driveway gate?

Yes. Mulholland Brand designs the driveway gate, walk gate and fence together as one front-yard package, matched in one finish, and several of our series offer matching walk gates and fencing.

Book an On-Site Measurement in Ventura County

Mulholland Brand builds automatic driveway gates for homes across Ventura County, including Thousand Oaks, Simi Valley, Camarillo and Oxnard, whether the driveway climbs a hillside or sits on a flat lot near the coast. The first step is the same for every property: our design consultant measures your opening, recommends swing or sliding, and gives you an itemized written price for the exact gate your driveway needs. Book your on-site measurement today.

Mulholland Brand 7959 Deering Ave, Canoga Park, CA 91304 San Diego office: 6352 Corte Del Abeto, Suite B, Carlsbad, CA 92011 Hours: Monday to Friday, 8 AM to 5 PM Call (877) 616-2947 or (800) 562-5770 California contractor license CSLB #1061373 Serving Los Angeles, Orange, Ventura and San Diego counties