Mulholland Brand builds custom laser-cut gates and matching fence panels for homes across Ventura County. If you want one company to design, cut, frame and install a decorative aluminum gate, call Mulholland for a quote. You can choose one of its 39 catalog designs or have your own artwork cut as a one-off. The cut aluminum panel is set in a welded aluminum frame and delivered as a complete gate, and your fence panels can carry the same design. Everything is cut, welded, powder-coated and finished in-house at Mulholland's own Canoga Park factory, with no outsourcing and no imported parts. Every gate is custom-measured on site at your home before it is built.

At a glance

Most homeowners start from one of two places. Some want to pick from designs that already exist. Others have a pattern in mind that exists nowhere else. This guide covers both paths, then answers the questions to ask anyone who bids on a laser-cut gate.

Ventura County is one of the four counties we serve, along with Los Angeles, Orange and San Diego counties. Whether you live in Thousand Oaks, Camarillo, Oxnard, Simi Valley or elsewhere in the county, the process is the same: one of our design consultants visits your property, you get a written price, our factory builds the gate and our own crew installs it. Our Ventura County service area page has the local details. For every gate and fence style we offer, read our guide to aluminum gates and fences in Ventura County.

Two Starting Points: 39 Catalog Designs or Your Own Artwork

You can start a Mulholland Brand laser-cut gate from one of 39 catalog designs or from your own artwork, cut as a one-off. Either way you get a complete aluminum gate built to your opening. The only difference is where the pattern comes from.

Choosing from the 39 catalog designs

Our ornamental aluminum gates come in two families. Classic 48 uses spear-top pickets styled like traditional wrought iron. The other family is our 39 laser-cut designs, which run from classical scrollwork to botanical screens. Scrollwork can echo a traditional facade. A botanical screen can tie the gate to a planted front yard.

The catalog is the faster way to decide. Each design already exists, so you know what you are choosing before you commit. Browse our laser-cut aluminum designs and bring a shortlist to the consultation.

Having your own artwork cut as a one-off

If the design you want is not in the catalog, we can cut it from your own artwork. That might be a family motif, a logo, a pattern from a tile or window elsewhere in the house, or a drawing your architect or builder has already prepared. We can fabricate to an architect's or builder's drawing, so a design that is already in your plans can carry through to the gate.

A one-off cut means your gate will not match anyone else's on the street. Choose this path if the gate is part of the architecture to you, not an accessory to it.

How to decide between them

Three questions usually settle it:

  1. Do you already have a design? If you do, bring it. If you don't, the catalog gives you 39 finished starting points.
  2. How much do you want to see before you choose? A catalog design already exists, so you know how it looks. A one-off is new, so you approve it from artwork.
  3. Does the pattern need to mean something? A family initial or a motif tied to the house is a one-off by definition.

We work in powder-coated aluminum. If you want a hand-forged iron gate, look for a blacksmith or metal-art studio. If you want a decorative cut pattern in a gate that does not rust like iron, read on.

A Complete Gate, Not a Loose Laser-Cut Panel

Mulholland Brand delivers laser-cut driveway gates as finished gates, not as panels for someone else to mount. We fabricate them in-house as complete gates, with the cut aluminum panel set in a welded aluminum frame. You get one built unit, sized to your opening.

The panel is only part of a gate. The frame has to hold it square, carry the hinges or the wheels and take daily use. When the cutting and the framing happen at different shops, nobody owns the fit between them. When one factory does both, the panel and the frame are built for each other.

What the frame and finish are made of

Our driveway gates are made from 6063-T5 aluminum. We use marine-grade aluminum with an electrostatic powder coat applied in our own powder coating facility, a corrosion-resistant finish that holds up to Southern California sun and salt air.

Weight matters too. Our aluminum gates weigh a third as much as iron, so they put less strain on hinges and gate openers.

Swing, double swing or sliding

We build driveway gates as single swing, double swing or sliding gates, manual or automated, and we build pedestrian walk and side gates as well. At the on-site measurement we check the opening and recommend swing or sliding based on what we find. See the full range of aluminum driveway gates, where laser-cut sits alongside slatted, solid privacy, glass, wood-look and spear-top picket styles.

One Pattern Across the Driveway Gate, Walk Gate and Fence

Your driveway gate, walk gate and fence panels can share the same laser-cut design. Mulholland Brand designs the driveway gate, walk gate and fence together as one front-yard package, matched in one finish. Several of our aluminum gate series also offer matching walk gates and fencing.

Designing the front yard as one package

When a decorative gate is chosen on its own, the fence beside it often becomes an afterthought, and you end up with plain pickets next to a detailed pattern. Planning everything at once avoids that. We measure the openings and the fence runs on site, so the whole front yard is designed as one package in one finish.

Our gates and fences come in Profile 24, Hi-Tech, Glass, Wood-Like, Iron Look, Laser-Cut, Solid and Fancy Fence styles, in more than 20 powder-coat colors and wood-look finishes.

If your project is mostly fencing, read our guide to custom laser-cut aluminum fence panels.

What comes with a walk gate

You use the walk gate every day, so the hardware matters. Our walk gates come with a high-quality mortise lock, two keys, a pick-resistant profile cylinder, concealed architectural hinges and a pre-installed strike. Compare styles on our pedestrian gates page.

Why Custom Laser-Cut Gates From a Canoga Park Factory Suit Ventura County Homes

Mulholland Brand's factory is in Canoga Park, in the west San Fernando Valley, not in Ventura County. That works in your favor: the cutting, welding and powder coating all happen in one place we control, and your gate is still measured at your home. Ventura County is inside our service area, so the factory's location changes where your gate is built, not how well it fits.

Cut, welded and powder-coated under one roof

Our aluminum gates and fences, including the laser-cut designs, are cut, welded, powder-coated and finished under one roof at our own Canoga Park factory, with no outsourcing and no imported parts. Our own W-2 employees do the installation.

That matters more than usual for a laser-cut gate, because the pattern, the frame and the finish all have to line up. We build your gate from the first cut to the installation.

We've been operating since 1994. We are rated 4.5 stars on average across more than 850 Google and Yelp reviews, as of October 2026. We also work with HOA boards and community managers.

Built for sun and salt air

Ventura County runs from inland valleys to the coast, so a gate in Simi Valley and a gate in Oxnard live in different conditions. Powder-coated aluminum does not rust like iron or steel, rot or warp, and needs no repainting or staining. Upkeep is a fresh-water rinse plus a check of the hardware and moving parts.

Our written warranty: one year for any defect in manufacture or assembly, and three years against rust on the product, covering gates, fences, railings and pergolas; problems are reported in writing within 7 days. The full terms are on our warranties page.

Want to know what your opening needs? Book an on-site measurement and we will give you an itemized written price for your exact gate and fence.

Questions to Ask Any Laser-Cut Gate Builder, Answered

Before you hire anyone to build custom laser-cut gates, ask who does the cutting, whether you get loose panels or a finished gate, whether the gate and fence can share one pattern, how the price is written and who installs it. Here is how Mulholland Brand answers each one. In short: we cut in-house, deliver a complete welded gate, match the gate and fence in one finish, price in writing after measuring on site and install with our own crew.

Is the laser cutting done in-house or sent out?

In-house. Mulholland Brand cuts, welds, powder-coats and finishes every laser-cut gate and fence under one roof at our own Canoga Park factory, with no outsourcing and no imported parts.

Do I get loose panels or a finished gate?

A finished gate. The cut aluminum panel is set in a welded aluminum frame and delivered as a complete gate, built to fit your opening.

Can the gate and the fixed fence panels share one pattern?

Yes. We design the driveway gate, walk gate and fence together as one front-yard package, matched in one finish.

Can I use my own design?

Yes. Choose from our 39 catalog designs, or have your own artwork cut as a one-off. Mulholland Brand can also work from an architect's or builder's drawing.

Is the gate made to a standard size?

No. We custom-measure every gate on site and fabricate it to fit the opening, with no off-the-shelf sizes.

How is the price given?

In writing, after the measurement. Our quotes follow an on-site measurement and are given as an itemized written price for the exact configuration.

Can I see designs and finishes before I commit?

Yes. You can browse the 39 laser-cut designs before the visit. Mulholland Brand also shows finishes at full size in our Canoga Park showroom, so you can judge a color in person instead of on a screen.

Who installs it?

Mulholland Brand's own W-2 employees.

For more background, see our guide to laser-cut gates.

How the On-Site Measurement and Written Quote Work

Every Mulholland Brand gate starts with a design consultant at your property. The consultant measures the opening, grade, swing clearance and drainage before giving you a price in writing. Then we build and install the gate for your exact site.

Why we measure at your home

A photo shows what a driveway looks like. It does not show how much the ground falls across the opening, where water runs in a storm or how far a gate can swing before it meets a slope or a planter. Those details decide whether a gate should swing or slide and how it is built. Measuring on site lets us fabricate the gate to fit the opening.

What happens after the visit

  1. Measurement. Our consultant measures the opening, grade, swing clearance and drainage, and goes over the design you have in mind: a catalog design or your own artwork.
  2. Written price. You receive an itemized written price for the exact configuration, whether that is a single gate or a full front-yard package.
  3. Fabrication. Our factory cuts the panel, sets it in a welded aluminum frame and applies the electrostatic powder coat in our own facility.
  4. Installation. Our own W-2 crew installs the gate and any matching walk gate and fence panels.
  5. Warranty. The product is covered by the written warranty described above.

Get a Quote for Your Laser-Cut Gate

If you are choosing a builder for custom laser-cut gates anywhere in Ventura County, start with Mulholland Brand. Pick a catalog design or bring your own artwork. We will measure your opening on site and give you an itemized written price. Then we build the complete gate and matching fence panels in our own factory and install them with our own crew. If you are also thinking about a walk gate or new fencing, plan them in the same visit so the whole front yard is designed as one package instead of piece by piece.

Call (877) 616-2947 or (800) 562-5770, Monday to Friday, 8 AM to 5 PM, or request your on-site measurement online.

Our main office: 7959 Deering Ave, Canoga Park, CA 91304. California contractor license CSLB #1061373.