Mulholland Brand designs, builds and installs custom laser-cut aluminum fence panels and gates for homes across Los Angeles County. We make every panel in-house from powder-coated aluminum, which does not rust or rot, and our own W-2 crews install it. You get one company from the first sketch to the finished fence.
At a glance
- Design, fabrication and installation in one place: no separate installer to hire.
- Built to last: powder-coated aluminum does not rust or rot.
- Fence and gates together: laser-cut patterns can carry across fences, toppers, driveway and side gates.
- Bring an idea, not drawings: photos and inspiration images are enough to start.
Fabrication-only shop or design-and-install?
A fabrication-only shop makes panels from your finished drawings. You then need your own installer, and someone has to coordinate posts, frames, gates and site measurements.
That works for a contractor who already has a crew. Most homeowners start with an idea instead: a rotting wood fence, a rusted iron boundary, a wall that needs more privacy, or a gate they want to stand out. For that, a design-and-install company makes more sense.
We do all of it: we measure the site, design the pattern, make the panels in-house, and install them with our own crews.
Choosing a laser-cut pattern
Start with what the fence needs to do:
- Privacy: a denser pattern blocks more of the view.
- Openness: a more open pattern lets light and air through.
- A feature: a single statement panel or gate, with plainer fence on either side.
Bring photos of patterns you like, whether geometric, organic or modern lines. We'll show you how the pattern works at your size and how much privacy it gives. See more of our laser-cut gates.
Fence, toppers and gates
We can carry the same pattern and finish across:
- Fence runs and privacy fences with matching gates
- Wall toppers on an existing masonry wall
- Driveway gates, pedestrian gates and side gates
Gates can include smart access: keypad and fingerprint locks, car-integrated openers and intercoms.
If you want a warmer look, our wood-look aluminum has the look and feel of wood without the rot. It pairs well with a laser-cut feature panel.
How a laser-cut fence project works with us
- Share your idea. Send photos of the site and the patterns you like.
- We measure the site. Our team checks the fence line, walls, slopes and gate openings.
- We design the pattern to your size. You see how the pattern looks across the full fence and gates before anything is cut.
- We make it in-house. Your panels are manufactured at our factory in Canoga Park.
- Our own crew installs it. The same company that designed and built the fence installs it.
Because one company handles every step, the pattern lines up from panel to panel and gate to fence, and you have one company to call with questions.
Replacing wood or wrought iron
Many laser-cut projects start with a fence that has worn out. Wood rots at the posts and wrought iron rusts at the welds. Powder-coated aluminum does neither, so a laser-cut aluminum fence keeps its pattern and finish. If you're in the Valley, see our San Fernando Valley wood-look aluminum fence.
What to send us
- Your city or neighborhood
- Photos of the current fence, wall, gate openings and slope
- Rough width and height of each section
- Inspiration images of patterns you like
- How much privacy you want
- Any gates you need
Why Los Angeles homeowners choose Mulholland Brand
- We make it ourselves. Every panel, fence and gate is designed and manufactured in-house, from powder-coated aluminum, at our factory in Canoga Park.
- Our own crews install it. Installation is done by our own W-2 employees, not subcontractors.
- Licensed and operating since 1994. California contractor license CSLB #1061373.
- Across LA County. Los Angeles, the San Fernando Valley, Santa Monica, Pasadena, Altadena, Encino, Woodland Hills, Calabasas, Beverly Hills, Malibu and Westlake Village.
See more of our aluminum fencing in Los Angeles.
Frequently asked questions
Who designs and installs custom laser-cut aluminum fence panels in Los Angeles?
Mulholland Brand. We design, fabricate and install laser-cut aluminum fences and gates across Los Angeles County, with our own W-2 crews.
Do I need finished drawings?
No. Photos, rough measurements and inspiration images are enough. We handle the design and site measurements.
Can the gate match the fence pattern?
Yes. We design the fence, toppers and driveway, pedestrian or side gates together.
Will an aluminum fence rust?
No. Our powder-coated aluminum does not rust or rot.
Can I get a wood look?
Yes. Our wood-look aluminum has the look and feel of wood without the rot.
Start your laser-cut fence
Send us photos, rough measurements and the patterns you like. We'll design your fence and give you a written quote.
Book a consultation with Mulholland Brand. Our office is open Monday to Friday, 9 AM to 5 PM.