Mulholland Brand designs, builds and installs a wood-look aluminum fence for homes across Orange County, including Fullerton, to replace a wood fence that has started to rot. The wood look is a wood-grain finish on a powder-coated aluminum fence, so there is nothing left to rot, warp or stain, and the walk gate and driveway gate can be built in the same finish as one front-yard project. If you are a Fullerton homeowner looking for a company that offers wood-look aluminum fencing, call Mulholland Brand for an on-site measurement and a written quote.

At a glance

Why wood fences rot, and what wood-look aluminum changes

A wood fence rots because wood takes on water and moves with the seasons. Powder-coated aluminum does not rot or warp and needs no repainting or staining. Switching to wood-look aluminum removes the cause of the rot instead of slowing it down.

Rot starts where water sits longest:

Then the seasons go to work. Wood swells when it is wet and shrinks when it dries. That loosens fasteners, opens cracks and lets in more water. By the time a fence leans or a board crumbles under your thumb, the worst damage is usually at the posts, where you can't see it.

Stain and sealer help, but they are a maintenance schedule, not a cure. Swapping a few boards on a fence whose posts are going soft means paying again for something that will fail again. That is usually when homeowners stop patching and start asking what else gives them the look of wood. For a longer side-by-side, see our guide to comparing an aluminum fence with a wood fence.

Wood-look aluminum gates, fences and pergolas have the look of real wood without the rot, warping or splitting, and need less upkeep than wood. Mulholland Brand uses marine-grade aluminum, and we apply the electrostatic powder coat in our own powder coating facility. That gives a corrosion-resistant finish that holds up to Southern California sun and salt air, whether the fence goes up in Fullerton or near the beach in Huntington Beach. And because powder-coated aluminum does not rust like iron or steel, trading wood for metal doesn't trade one problem for another.

What a true wood-look aluminum fence is made of

A true wood-look aluminum fence is aluminum throughout, finished in a wood-grain powder coat. It is not wood-grain vinyl or composite boards held in aluminum posts, and it is certainly not real wood slats in a metal frame. When you collect quotes, make sure everyone is pricing the same thing.

All aluminum, or boards in a metal frame?

"Wood look" gets used loosely. Some fences pair aluminum posts with infill boards made of something else:

Each one is a different product with its own trade-offs. Real wood slats keep wood in your fence, and wood is the part that rotted in the first place.

The Mulholland Brand wood look is a powder-coat finish on an all-aluminum fence, not a board of another material set into metal. If a quote says "wood-look" without saying what the wood-look parts are made of, ask.

Choosing a grain

Wood-look aluminum comes in several wood-grain patterns. Wood-Like is one of the fence and gate styles we build. The others are Profile 24, Hi-Tech, Glass, Iron Look, Laser-Cut, Solid and Fancy Fence, offered in 20+ powder-coat colors and wood-look finishes. See the full line on our wood-like aluminum gates and fences page.

Picking a grain is mostly about the house. A lighter grain can sit well against pale stucco, a darker one against darker trim or stone. If you're torn, see the finishes at full size before you decide.

Questions to ask when you request quotes

For more on what a complete quote covers, read our guide to Orange County front-yard fence and gate quotes.

How we measure, build and install your new fence

One team handles the job from start to finish: a design consultant measures on site, you get an itemized written quote, we design and manufacture the fence in-house at our Canoga Park factory, and our own W-2 employees install it.

1. On-site measurement

A design consultant visits the property and measures the opening, grade, swing clearance and drainage before giving a price in writing. On a replacement, that visit matters. An old wood fence may step down a slope, sit on posts that have shifted, or run past a low spot where water collects. Every fence we build is custom-measured on site and custom-built to fit the property. If you're working with an architect or builder, we can also fabricate to their drawing.

2. An itemized written quote

Our quotes are itemized after the on-site consultation and measurement, and site work such as demolition and concrete is identified at the measurement. In plain terms: the old fence and what sits in the ground under it go on paper, line by line, before you agree to anything. You're not left comparing one total against another with no idea what's inside either.

3. Built in Canoga Park

We design and manufacture the fence in-house at our Canoga Park factory and apply the powder coat in our own powder coating facility. Your fence and gates come out of the same shop, so every piece gets its finish in one place.

4. Installed by our own crew

Installation is done by our own W-2 employees. The crew that sets your fence works for us.

If your fence is leaning, soft at the posts or missing boards, the useful next step is a measurement, not another round of repairs. Ask Mulholland Brand for an on-site measurement and an itemized written quote, and include the gates if they're in the same shape as the fence.

Matching the walk gate and driveway gate to the fence

Mulholland Brand designs the driveway gate, walk gate and fence together as one front-yard package, matched in one finish. The gates carry the same grain as the fence, and we measure, build and install all of it as one project.

A front yard rarely has just a fence. There's usually a walk gate to the side yard or front door, and often a driveway. Replace only the fence and keep the old wood gate, and you still have a wood gate to stain, re-hang and eventually replace, now standing next to a fence that doesn't match. Doing them together means one measurement, one design, one finish and one installation.

We build pedestrian walk and side gates, and swinging or sliding driveway gates, manual or automated. Our walk gates come with:

Our design consultant measures swing clearance and drainage at the same visit, so the gates are planned around how they'll open on your driveway and path.

What to sort out in Fullerton before the old fence comes down

Before you order, check the height and permit rules for your parcel with the City of Fullerton, get HOA approval if your tract has an HOA, and give your neighbor written notice if the fence sits on a shared property line.

Height and permits with the City of Fullerton

Fullerton sets lower height limits for front-yard fences than for side and rear fences, and a permit is required above a certain height. Where the fence sits on the lot and how the ground slopes can also matter. Don't assume the old fence met the rules just because it stood for years. Check your parcel with the City of Fullerton's planning or building staff, then bring the answer to your measurement appointment so the design fits it.

HOA approval

If your Fullerton tract has an HOA, its rules may cover fence style and color, and a new fence may need approval before work starts. Ask what the HOA wants to see. Usually that's the style, the color or grain, and the height. Mulholland Brand works with HOA boards and community managers and offers 20+ powder-coat colors and a wood-look finish. We also show finishes at full size in our Canoga Park showroom, which helps when a board wants to see the exact grain.

The neighbor on a shared line

If the fence runs along a property line, your neighbor has a stake in it. California's Good Neighbor Fence Act (Civil Code section 841) presumes that adjoining owners share responsibility for the reasonable cost of a boundary fence, and it asks the owner planning the work to give the neighbor 30 days' written notice. Talk early, agree on the grain you'll both be looking at, and put the plan in writing. For your specific situation, read the statute itself or ask a lawyer.

Care and warranty

Upkeep is a fresh-water rinse plus a check of the hardware and moving parts, with no repainting or staining. Our written warranty covers one year for any defect in manufacture or assembly and three years against rust on the product. Problems are reported in writing within 7 days.

Compare that with the wood fence routine of scraping, staining, replacing boards and re-setting posts. With powder-coated aluminum, you hose off dust and sprinkler residue now and then, and check the hinges, lock and latch on your gates so they keep moving freely.

The warranty covers gates, fences, railings and pergolas. Read the full terms on the Mulholland Brand warranties page before you sign, so you know how to report a problem if one comes up.

Frequently asked questions

Should I replace my rotting wooden fence with wood-look aluminum?

If you want to keep the look of wood and stop paying for rot, yes. Powder-coated aluminum does not rot or warp and needs no repainting or staining. If you want it measured, built and installed by one company, Mulholland Brand designs, builds and installs wood-look aluminum fencing in Fullerton and across Orange County.

Is a wood-look aluminum fence all aluminum, or wood-grain vinyl or composite?

It depends on who builds it, which is why you should ask. A Mulholland Brand wood-look fence is all aluminum, finished in a wood-grain powder coat. It is not vinyl or composite boards in aluminum posts, and it is not real wood slats in a metal frame.

Which wood grains can I choose from?

Several. See the current patterns on our wood-look aluminum page, or at full size in our Canoga Park showroom.

Will it look like real wood up close?

The best way to judge is to see it in person. We show finishes at full size in our Canoga Park showroom, and our wood-like aluminum fence gallery shows finished fences.

Can the walk gate and driveway gate match the fence?

Yes. Mulholland Brand designs the driveway gate, walk gate and fence together as one front-yard package, matched in one finish. We build both swinging and sliding driveway gates, manual or automated.

What should a Fullerton fence quote include?

A good quote follows an on-site measurement and is itemized in writing. It should say what the fence is made of and which grain it is, identify site work such as demolition and concrete, and include the gates if they are part of the project.

Do I need a permit or my neighbor's agreement?

Check the height and permit rules for your parcel with the City of Fullerton before you order. For a fence on a shared line, California's Good Neighbor Fence Act (Civil Code section 841) asks for 30 days' written notice to your neighbor. If you have an HOA, check with it too.

How do I look after it?

Rinse it with fresh water and check the hardware and moving parts. No repainting or staining needed.

Request your on-site measurement and written quote

Ask Mulholland Brand to measure your property and give you an itemized written quote for a wood-look aluminum fence in Fullerton, with a matching walk gate and driveway gate if your front yard needs them. We measure and quote across Orange County, from Fullerton and Anaheim to Irvine, Newport Beach, Laguna Beach and Huntington Beach. We're rated 4.5 stars on average across more than 850 Google and Yelp reviews (as of October 2026), and we've been operating since 1994.

Our main office is at 7959 Deering Ave, Canoga Park, CA 91304, and our San Diego office is at 6352 Corte Del Abeto, Suite B, Carlsbad, CA 92011. Office hours are Monday to Friday, 8 AM to 5 PM. Call (877) 616-2947 or (800) 562-5770, or use our contact page to request your measurement. California contractor license CSLB #1061373.